Untitled Document

CAP Products

We make no money on any CAP product. Our loss is your gain. We are so confident that you will continue to do business with us that we are willing to give you this unbelievable deal. You win, we win!

Temperature/Humidity Control

The AIR-1 allows you to control the temperature and humidity within your growing environment. Connect your ventilation equipment (air conditioner, fan, etc.) to the exhaust outlet. Then set your temperature and humidity to the level that you wish to maintain. If either level is exceeded, the exhaust outlets are activated to reduce heat and humidity. The AIR-1 is rated for 10 amps @ 120 volts.

The AIR-2 has the same features as the Air-1 with the exception of separate temperature and humidity outlets. This allows you to control the temperature and humidity independently. Once you have connected your temperature control device (air conditioner, fan, etc.) and a dehumidifier to the AIR-2, your desired temperature and humidity are automatically maintained. The AIR-2 is rated for 10 amps @ 120 volts.

The AIR-3 expands the line of atmospheric controllers by providing the ability to coordinate supplemental CO2 with your ventilation equipment. The AIR-3's operation is similar to the Air-1, with the addition of a photo cell and CO2 outlets. The photo cell ensures that your CO2 device (CO2 valve or generator) only activates when your lights are on. To conserve CO2, the CO2 outlets are automatically disabled while your ventilation equipment is running. The AIR-3 is rated for 10 amps @ 120 volts.

The AIR-4 has all the features of the Air-3 with the addition of independent temperature and humidity controls. It also has an increased power capacity to control up to 15 amps of equipment. An additional outlet is provided which will power equipment only during the 'day' cycle. Features include independent temperature and humidity control, coordinated CO2 sequencing and an additional outlet that is powered only while the lights are on. The AIR-4 is rated for 15 amps @ 120 volts.

The TMP-1 allows you to control the temperature within your growing environment. Just plug in your cooling fans or ventilation and set the temperature that you wish to maintain your room at. If the temperature exceeds the set point, the thermostat activates the front outlet to turn your appliance on

Timers/Photo Control

The ART series of adjustable recycling timers control any application requiring a device to be turned ON and OFF at precise intervals. The ART series has a user adjustable ON time of 30 seconds to 30 minutes. The ART-2 has a user adjustable OFF time of 3-120 minutes, while the ART-3 OFF time is adjustable from 12-480 minutes. Compact and simple to use... just set the ON and OFF time at the desired intervals and plug it in. The ART timers have a wide range of uses including controlling hydroponic pumps, simple CO2 controller, turning on and off ozone generators, running exhaust fans, etc. ART timers are rated for 15 amps @ 120 volts.

The NFT series of preset recycling timers are the simplest devices available for turning a device ON and OFF at precise intervals. The NFT-1 timer is pre-set to turn ON for 1 minute and OFF for 4 minutes. The NFT-2 timer is preset at 3 minutes ON and 5 minutes OFF. Plug the NFT into any standard outlet... plug whatever you want to control into the receptacle on the front face... and you're done. NFT timers are rated for 15 amps @ 120 volts.

The PTC series of photo controllers are perfect when you need to turn something ON only during daylight hours or only at night. A photocell senses whether it is day or night, and turns the device plugged into it On or OFF depending on which model you are using. The PTC-1 turns ON whatever is plugged into it during the "day" when the lights are on. The PTC-2 turns ON the device during the "night", when the lights are off. PTC(s) are rated for 10 amps @ 120 volts.